DMX512 Lighting Controller (Dimmer)
DM-10-DMX

The DMX512 Lighting Controller (Dimmer) is an innovative product of the “Leading Edge & Trailing Edge” technology, specifically designed to fulfill the needs of professional illumination and energy saving for LEDlighting fixtures operating at 230Vac. It’s perfect linearity in lighting adjustment with alternative types of lamps such as EDISON-Filament LED, Dimmable LED, Dimmable CFL and previous technology lamps (RESISTIVE & HALOGEN) makes this product unique.

Control: The DM-10-DMX Dimmer is controlled by professional lighting consoles and other digital systems via the DMX512 protocol.

Function Selection: Switching to Leading Edge is achieved by placing the jumper on the pins (the jumper is placed by default). Trailing Edge function is selected by removing the jumper from the pins, if required by the lamp type.

Lowest threshold setting: DM-10-DMX enables the user to preconfigure the minimum point of brightness for Dimmable Led lamps, if required. The process is achieved by adjusting a potentiometer (trimmer) located on the product.



DM-10-DMX Dimmer has two pairs of triple screw terminals for fast electrical installation:

  • Signal input DMX512 for controlling and adjusting the lighting intensity from other digital systems and professional light consoles that have digital DMX-512 communication protocol.
  • Signal output DMX512 for signalling in addition to a parallel connected device with DMX-512 communication protocol.
  • Input 230Vac/50Hz power supply
  • Output 230Vac/400W Dimmable

Advantages of DM-10-DMX:

  • Specifically designed for LED
  • Control through DMX512 communication protocol
  • Galvanically isolated input for DMX512 signal (provides protection from electrical noise and ground loops)
  • Selection of function (Leading Edge – Trailing Edge)depending on the connected load
  • Soft Start mode
  • Capability to set a lowest threshold of brightness for lamps (1% - 40%)
  • Electronic protection against overheating and overvoltage with automatic reset to operational mode

Technical Specifications

Dimmer: IGBT - Digital
Operating Voltage: 180 – 230V AC
Power Line Frequency: 50Hz
Output Power: 400 Watt
Select Function: Leading – Trailing Edge by placing -  removing the jumper.


CONTROL LOAD :

  • EDISON – FILAMENT LED
  • LED lamps (dimmable)
  • CFL lamps (dimmable)
  • Halogen lamps
  • Resistive
  • Magnetic transformers
  • Electronic transformers


ENVIRONMENT TEMPERATURE:-20°C until +50°C
FUSE: Electronic protection against overheating and overvoltage 
WIRE SIZE: From 0.5 mm to 3.5 mm
MOUNTING: Electrical switch box


EUROPEAN COMMUNITY DIRECTIVES:


The product complies with directives:
Low Voltage Directive: 2014/55/EU
EMC Directive: 2014/30/EU
EN 60669-1
EN 60669-2-1

Draft of Electrical Installation