espa banner

RAIL MOUNTING DIGITAL DIMMER 1000 Watt (Remote Control) DM - DGL / b

The DM - DGL / b rail mounting digital dimmer  is an innovative product of the digital technology, especially designed to fulfill the needs of professional spaces in the important field of lighting adjustment and energy savings. Its perfect linearity in lighting adjustment with alternative types of lamps such as  Dimmable LED, Dimmable CFL and previous technology lamps (RESISTIVE & HALOGEN) makes this product unique. The product can be remotely controlled through one or several distant buttons.


Handling: The DM - DGL / b rail mounting digital dimmer has 3 buttons for control and a remote control input.

  • Button 1:It is used to activate and de-activate the electric load.
  • Button 2 and 3: They are used to adjust the lighting intensity and therefore the consumption of the load at the desired point for the operator, from 1% to 100%.
  • Inputfor wired remote control from one or more parallel buttons for adjusting the lighting intensity (ON / OFF by briefly pressing the button and stretch the lighting - Dimming with a long press).

 

Adjustment of minimum power limit: The DM - DGL / b provides the capacity to also control loads from single-phase electric motors. Therefore, it is necessary to control the lower engine speed of the electric motor in order to avoid its overheating and thus its destruction.


This takes place as follows:

  • Step 1:Keep the button No 1 (ON / OFF) pressed.
  • Step 2:While the button No 1 is pressed, adjust the engine speed of the electric motor with buttons No 2 & No 3 (UP / DOWN) at the lowest allowed threshold.
  • Step 3:Release button No 1 (ON / OFF) and the adjustment is complete. To readjust the lowest threshold the same process must be repeated.

Note: Setting the lowest threshold as well as the remaining settings of the DM - DGL / b rail mounting digital dimmer is fully safe because storing them to a memory (EEPROM) takes place digitally, so there is no concern in case of power failure, irrespective of the duration.


PDF Manual

Download the DM-DGL/b manual


Technical Specifications

DIMMER: Electronic - digital
OPERATING VOLTAGE: 180 - 230 VAC
OPERATING FREQUENCY: 50Hz 
MAXIMUM OUTPUT POWER: 1000 Watt


CONTROL LOAD: 

  • RESISTIVE & HALOGEN
  • INDUCTIVE TRANSFORMERS
  • ELECTRONIC TRANSFORMERS
  • LED
  • ELECTRIC SINGLE - PHASE MOTORS:
  1. Universal
  2. Asynchronous with torque strongly depended from motor speed (centrifugal pumps, fans, ventilations etc)

ENVIRONMENT TEMPERATURE: -20°C until +50°C
FUSE: 6 A / 230VAC (for short-circuit protection) 
WIRE SIZE: From 0.5 mm to 3.5 mm
MOUNTING: Din-rail mounting 35 x 7.5 mm (DIN 45277)


EUROPEAN COMMUNITY DIRECTIVES:


The product complies with directives:
Low Voltage Directive: 2014/55/EU
EMC Directive: 2014/30/EU
EN 60669-1
EN 60669-2-1

Draft of Electrical Installation

3D Preview

Watch the three-dimensional representation of the product by long pressing click